Keyboard: dactyl manuform 6x6 added (#3662)

* mouse layer keys shifted

* mouse layer keys shifted

* manuform 5x6 added

* mouse layer keys shifted

* manuform 5x6 added

* dactyl_manuform 5x6 keymap added

* reorg. dactyl manuform folder

* removed LAYOUTS = ortho_4x12 for 4x5

* Rows and Cols in config.h fixed

* MASTER_LEFT

* 5x6 matrix fixed

* keymap updated

* removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD

* default keymap for dactyl_manuform 5x6

* Fixes for Dactyl Manuform

* Add/update default keymap

* readme dactyl_manuform updated

* links to keymaps added

* dactyl_manuform 6x6 added. README updated

* dactyl_manuform README updated

* cleanup

* more cleanup

keyboards/handwired/dactyl_manuform/readme.md

@@ -1,32 +1,55 @@
-Dactyl Manuform 5x6
+Dactyl Manuform (4x5, 5x6, 6x6)
 ======
 the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
 ![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
 
 
 ## First Time Setup
-
+-----------------
 Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
 
+Depending on your Layout chose one of the follwing commands:
+
 ```
-$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME
+$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
+```
+
+example:
+```
+$ make handwired/dactyl_manuform/4x5:default
 ```
 
 If everything worked correctly you will see a file:
 
 ```
-dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex
+dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
 ```
 
 For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
 
+
 ## Keymaps
-Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
-### Impstyle
+-----------------
+### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
 
+#### Default
+Simple QWERTY layout with 3 Layers.
+#### Dvorak
 
+### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
 
-Required Hardware
+#### Default
+Just a copy of the Impstyle keymap. Feel free to adjust it.
+
+#### Impstyle
+A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
+
+### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
+
+#### Default
+Simple QWERTY layout with 3 Layers.
+
+##Required Hardware
 -----------------
 
 Apart from diodes and key switches for the keyboard matrix in each half, you
@@ -39,11 +62,11 @@ Alternatively, you can use any sort of cable and socket that has at least 3
 wires. If you want to use I2C to communicate between halves, you will need a
 cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
 
-Optional Hardware
+##Optional Hardware
 -----------------
 A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
 
-Wiring
+##Wiring
 ------
 
 The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
@@ -66,18 +89,18 @@ unnecessary in simple use cases.
 
 You can change your configuration between serial and i2c by modifying your `config.h` file.
 
-Notes on Software Configuration
+##Notes on Software Configuration
 -------------------------------
 
 the keymaps in here are for the 4x5 layout of the keyboard only.
 
-Flashing
+##Flashing
 -------
-From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
-Example: `make lets_split/rev2:default:avrdude`
+
+To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
 
 
-Choosing which board to plug the USB cable into (choosing Master)
+##Choosing which board to plug the USB cable into (choosing Master)
 --------
 Because the two boards are identical, the firmware has logic to differentiate the left and right board.