Merge tag '0.13.13' into firmware_21
This commit is contained in:
Drashna Jael're
@@ -4,13 +4,13 @@ _qmk_install() {
|
||||
echo "Installing dependencies"
|
||||
|
||||
sudo pacman --needed --noconfirm -S \
|
||||
base-devel clang diffutils gcc git unzip wget zip \
|
||||
python-pip \
|
||||
avr-binutils \
|
||||
arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \
|
||||
avrdude dfu-programmer dfu-util
|
||||
base-devel clang diffutils gcc git unzip wget zip python-pip \
|
||||
avr-binutils arm-none-eabi-binutils arm-none-eabi-gcc \
|
||||
arm-none-eabi-newlib avrdude dfu-programmer dfu-util
|
||||
sudo pacman --needed --noconfirm -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
|
||||
sudo pacman --needed --noconfirm -S avr-libc # Must be installed after the above, or it will bring in the latest avr-gcc instead
|
||||
|
||||
sudo pacman --needed --noconfirm -S hidapi # This will fail if the community repo isn't enabled
|
||||
|
||||
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
|
||||
}
|
||||
|
||||
@@ -13,10 +13,9 @@ _qmk_install() {
|
||||
|
||||
sudo apt-get -yq install \
|
||||
build-essential clang-format diffutils gcc git unzip wget zip \
|
||||
python3-pip \
|
||||
binutils-avr gcc-avr avr-libc \
|
||||
binutils-arm-none-eabi gcc-arm-none-eabi libnewlib-arm-none-eabi \
|
||||
avrdude dfu-programmer dfu-util teensy-loader-cli libusb-dev
|
||||
python3-pip binutils-avr gcc-avr avr-libc binutils-arm-none-eabi \
|
||||
gcc-arm-none-eabi libnewlib-arm-none-eabi avrdude dfu-programmer \
|
||||
dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev
|
||||
|
||||
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
|
||||
}
|
||||
|
||||
@@ -5,11 +5,10 @@ _qmk_install() {
|
||||
|
||||
# TODO: Check whether devel/headers packages are really needed
|
||||
sudo dnf $SKIP_PROMPT install \
|
||||
clang diffutils git gcc glibc-headers kernel-devel kernel-headers make unzip wget zip \
|
||||
python3 \
|
||||
avr-binutils avr-gcc avr-libc \
|
||||
clang diffutils git gcc glibc-headers kernel-devel kernel-headers \
|
||||
make unzip wget zip python3 avr-binutils avr-gcc avr-libc \
|
||||
arm-none-eabi-binutils-cs arm-none-eabi-gcc-cs arm-none-eabi-newlib \
|
||||
avrdude dfu-programmer dfu-util libusb-devel
|
||||
avrdude dfu-programmer dfu-util hidapi
|
||||
|
||||
python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
|
||||
}
|
||||
|
||||
@@ -22,9 +22,10 @@ _qmk_install() {
|
||||
echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
|
||||
sudo emerge -auN sys-devel/gcc
|
||||
sudo emerge -au --noreplace \
|
||||
app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang sys-devel/crossdev \
|
||||
\>=dev-lang/python-3.7 \
|
||||
dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util
|
||||
app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang \
|
||||
sys-devel/crossdev \>=dev-lang/python-3.7 dev-embedded/avrdude \
|
||||
dev-embedded/dfu-programmer app-mobilephone/dfu-util sys-apps/hwloc \
|
||||
dev-libs/hidapi
|
||||
|
||||
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr
|
||||
sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi
|
||||
|
||||
@@ -9,11 +9,10 @@ _qmk_install() {
|
||||
|
||||
pacman --needed --noconfirm --disable-download-timeout -S pactoys-git
|
||||
pacboy sync --needed --noconfirm --disable-download-timeout \
|
||||
base-devel: toolchain:x clang:x git: unzip: \
|
||||
python3-pip:x \
|
||||
avr-binutils:x avr-gcc:x avr-libc:x \
|
||||
arm-none-eabi-binutils:x arm-none-eabi-gcc:x arm-none-eabi-newlib:x \
|
||||
avrdude:x bootloadhid:x dfu-programmer:x dfu-util:x teensy-loader-cli:x
|
||||
base-devel: toolchain:x clang:x git: unzip: python3-pip:x \
|
||||
avr-binutils:x avr-gcc:x avr-libc:x arm-none-eabi-binutils:x \
|
||||
arm-none-eabi-gcc:x arm-none-eabi-newlib:x avrdude:x bootloadhid:x \
|
||||
dfu-programmer:x dfu-util:x teensy-loader-cli:x hidapi:x
|
||||
|
||||
_qmk_install_drivers
|
||||
|
||||
|
||||
@@ -60,3 +60,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000e", TAG+="uacc
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
|
||||
### Micro
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
|
||||
|
||||
# hid_listen
|
||||
KERNEL=="hidraw*", MODE="0660", GROUP="plugdev", TAG+="uaccess", TAG+="udev-acl"
|
||||
|
||||
319
util/uf2conv.py
Executable file
319
util/uf2conv.py
Executable file
@@ -0,0 +1,319 @@
|
||||
#!/usr/bin/env python3
|
||||
import sys
|
||||
import struct
|
||||
import subprocess
|
||||
import re
|
||||
import os
|
||||
import os.path
|
||||
import argparse
|
||||
|
||||
|
||||
UF2_MAGIC_START0 = 0x0A324655 # "UF2\n"
|
||||
UF2_MAGIC_START1 = 0x9E5D5157 # Randomly selected
|
||||
UF2_MAGIC_END = 0x0AB16F30 # Ditto
|
||||
|
||||
families = {
|
||||
'SAMD21': 0x68ed2b88,
|
||||
'SAML21': 0x1851780a,
|
||||
'SAMD51': 0x55114460,
|
||||
'NRF52': 0x1b57745f,
|
||||
'STM32F0': 0x647824b6,
|
||||
'STM32F1': 0x5ee21072,
|
||||
'STM32F2': 0x5d1a0a2e,
|
||||
'STM32F3': 0x6b846188,
|
||||
'STM32F4': 0x57755a57,
|
||||
'STM32F7': 0x53b80f00,
|
||||
'STM32G0': 0x300f5633,
|
||||
'STM32G4': 0x4c71240a,
|
||||
'STM32H7': 0x6db66082,
|
||||
'STM32L0': 0x202e3a91,
|
||||
'STM32L1': 0x1e1f432d,
|
||||
'STM32L4': 0x00ff6919,
|
||||
'STM32L5': 0x04240bdf,
|
||||
'STM32WB': 0x70d16653,
|
||||
'STM32WL': 0x21460ff0,
|
||||
'ATMEGA32': 0x16573617,
|
||||
'MIMXRT10XX': 0x4FB2D5BD,
|
||||
'LPC55': 0x2abc77ec,
|
||||
'GD32F350': 0x31D228C6,
|
||||
'ESP32S2': 0xbfdd4eee,
|
||||
'RP2040': 0xe48bff56
|
||||
}
|
||||
|
||||
INFO_FILE = "/INFO_UF2.TXT"
|
||||
|
||||
appstartaddr = 0x2000
|
||||
familyid = 0x0
|
||||
|
||||
|
||||
def is_uf2(buf):
|
||||
w = struct.unpack("<II", buf[0:8])
|
||||
return w[0] == UF2_MAGIC_START0 and w[1] == UF2_MAGIC_START1
|
||||
|
||||
def is_hex(buf):
|
||||
try:
|
||||
w = buf[0:30].decode("utf-8")
|
||||
except UnicodeDecodeError:
|
||||
return False
|
||||
if w[0] == ':' and re.match(b"^[:0-9a-fA-F\r\n]+$", buf):
|
||||
return True
|
||||
return False
|
||||
|
||||
def convert_from_uf2(buf):
|
||||
global appstartaddr
|
||||
numblocks = len(buf) // 512
|
||||
curraddr = None
|
||||
outp = []
|
||||
for blockno in range(numblocks):
|
||||
ptr = blockno * 512
|
||||
block = buf[ptr:ptr + 512]
|
||||
hd = struct.unpack(b"<IIIIIIII", block[0:32])
|
||||
if hd[0] != UF2_MAGIC_START0 or hd[1] != UF2_MAGIC_START1:
|
||||
print("Skipping block at " + ptr + "; bad magic")
|
||||
continue
|
||||
if hd[2] & 1:
|
||||
# NO-flash flag set; skip block
|
||||
continue
|
||||
datalen = hd[4]
|
||||
if datalen > 476:
|
||||
assert False, "Invalid UF2 data size at " + ptr
|
||||
newaddr = hd[3]
|
||||
if curraddr == None:
|
||||
appstartaddr = newaddr
|
||||
curraddr = newaddr
|
||||
padding = newaddr - curraddr
|
||||
if padding < 0:
|
||||
assert False, "Block out of order at " + ptr
|
||||
if padding > 10*1024*1024:
|
||||
assert False, "More than 10M of padding needed at " + ptr
|
||||
if padding % 4 != 0:
|
||||
assert False, "Non-word padding size at " + ptr
|
||||
while padding > 0:
|
||||
padding -= 4
|
||||
outp += b"\x00\x00\x00\x00"
|
||||
outp.append(block[32 : 32 + datalen])
|
||||
curraddr = newaddr + datalen
|
||||
return b"".join(outp)
|
||||
|
||||
def convert_to_carray(file_content):
|
||||
outp = "const unsigned long bindata_len = %d;\n" % len(file_content)
|
||||
outp += "const unsigned char bindata[] __attribute__((aligned(16))) = {"
|
||||
for i in range(len(file_content)):
|
||||
if i % 16 == 0:
|
||||
outp += "\n"
|
||||
outp += "0x%02x, " % file_content[i]
|
||||
outp += "\n};\n"
|
||||
return bytes(outp, "utf-8")
|
||||
|
||||
def convert_to_uf2(file_content):
|
||||
global familyid
|
||||
datapadding = b""
|
||||
while len(datapadding) < 512 - 256 - 32 - 4:
|
||||
datapadding += b"\x00\x00\x00\x00"
|
||||
numblocks = (len(file_content) + 255) // 256
|
||||
outp = []
|
||||
for blockno in range(numblocks):
|
||||
ptr = 256 * blockno
|
||||
chunk = file_content[ptr:ptr + 256]
|
||||
flags = 0x0
|
||||
if familyid:
|
||||
flags |= 0x2000
|
||||
hd = struct.pack(b"<IIIIIIII",
|
||||
UF2_MAGIC_START0, UF2_MAGIC_START1,
|
||||
flags, ptr + appstartaddr, 256, blockno, numblocks, familyid)
|
||||
while len(chunk) < 256:
|
||||
chunk += b"\x00"
|
||||
block = hd + chunk + datapadding + struct.pack(b"<I", UF2_MAGIC_END)
|
||||
assert len(block) == 512
|
||||
outp.append(block)
|
||||
return b"".join(outp)
|
||||
|
||||
class Block:
|
||||
def __init__(self, addr):
|
||||
self.addr = addr
|
||||
self.bytes = bytearray(256)
|
||||
|
||||
def encode(self, blockno, numblocks):
|
||||
global familyid
|
||||
flags = 0x0
|
||||
if familyid:
|
||||
flags |= 0x2000
|
||||
hd = struct.pack("<IIIIIIII",
|
||||
UF2_MAGIC_START0, UF2_MAGIC_START1,
|
||||
flags, self.addr, 256, blockno, numblocks, familyid)
|
||||
hd += self.bytes[0:256]
|
||||
while len(hd) < 512 - 4:
|
||||
hd += b"\x00"
|
||||
hd += struct.pack("<I", UF2_MAGIC_END)
|
||||
return hd
|
||||
|
||||
def convert_from_hex_to_uf2(buf):
|
||||
global appstartaddr
|
||||
appstartaddr = None
|
||||
upper = 0
|
||||
currblock = None
|
||||
blocks = []
|
||||
for line in buf.split('\n'):
|
||||
if line[0] != ":":
|
||||
continue
|
||||
i = 1
|
||||
rec = []
|
||||
while i < len(line) - 1:
|
||||
rec.append(int(line[i:i+2], 16))
|
||||
i += 2
|
||||
tp = rec[3]
|
||||
if tp == 4:
|
||||
upper = ((rec[4] << 8) | rec[5]) << 16
|
||||
elif tp == 2:
|
||||
upper = ((rec[4] << 8) | rec[5]) << 4
|
||||
assert (upper & 0xffff) == 0
|
||||
elif tp == 1:
|
||||
break
|
||||
elif tp == 0:
|
||||
addr = upper | (rec[1] << 8) | rec[2]
|
||||
if appstartaddr == None:
|
||||
appstartaddr = addr
|
||||
i = 4
|
||||
while i < len(rec) - 1:
|
||||
if not currblock or currblock.addr & ~0xff != addr & ~0xff:
|
||||
currblock = Block(addr & ~0xff)
|
||||
blocks.append(currblock)
|
||||
currblock.bytes[addr & 0xff] = rec[i]
|
||||
addr += 1
|
||||
i += 1
|
||||
numblocks = len(blocks)
|
||||
resfile = b""
|
||||
for i in range(0, numblocks):
|
||||
resfile += blocks[i].encode(i, numblocks)
|
||||
return resfile
|
||||
|
||||
def to_str(b):
|
||||
return b.decode("utf-8")
|
||||
|
||||
def get_drives():
|
||||
drives = []
|
||||
if sys.platform == "win32":
|
||||
r = subprocess.check_output(["wmic", "PATH", "Win32_LogicalDisk",
|
||||
"get", "DeviceID,", "VolumeName,",
|
||||
"FileSystem,", "DriveType"])
|
||||
for line in to_str(r).split('\n'):
|
||||
words = re.split('\s+', line)
|
||||
if len(words) >= 3 and words[1] == "2" and words[2] == "FAT":
|
||||
drives.append(words[0])
|
||||
else:
|
||||
rootpath = "/media"
|
||||
if sys.platform == "darwin":
|
||||
rootpath = "/Volumes"
|
||||
elif sys.platform == "linux":
|
||||
tmp = rootpath + "/" + os.environ["USER"]
|
||||
if os.path.isdir(tmp):
|
||||
rootpath = tmp
|
||||
for d in os.listdir(rootpath):
|
||||
drives.append(os.path.join(rootpath, d))
|
||||
|
||||
|
||||
def has_info(d):
|
||||
try:
|
||||
return os.path.isfile(d + INFO_FILE)
|
||||
except:
|
||||
return False
|
||||
|
||||
return list(filter(has_info, drives))
|
||||
|
||||
|
||||
def board_id(path):
|
||||
with open(path + INFO_FILE, mode='r') as file:
|
||||
file_content = file.read()
|
||||
return re.search("Board-ID: ([^\r\n]*)", file_content).group(1)
|
||||
|
||||
|
||||
def list_drives():
|
||||
for d in get_drives():
|
||||
print(d, board_id(d))
|
||||
|
||||
|
||||
def write_file(name, buf):
|
||||
with open(name, "wb") as f:
|
||||
f.write(buf)
|
||||
print("Wrote %d bytes to %s" % (len(buf), name))
|
||||
|
||||
|
||||
def main():
|
||||
global appstartaddr, familyid
|
||||
def error(msg):
|
||||
print(msg)
|
||||
sys.exit(1)
|
||||
parser = argparse.ArgumentParser(description='Convert to UF2 or flash directly.')
|
||||
parser.add_argument('input', metavar='INPUT', type=str, nargs='?',
|
||||
help='input file (HEX, BIN or UF2)')
|
||||
parser.add_argument('-b' , '--base', dest='base', type=str,
|
||||
default="0x2000",
|
||||
help='set base address of application for BIN format (default: 0x2000)')
|
||||
parser.add_argument('-o' , '--output', metavar="FILE", dest='output', type=str,
|
||||
help='write output to named file; defaults to "flash.uf2" or "flash.bin" where sensible')
|
||||
parser.add_argument('-d' , '--device', dest="device_path",
|
||||
help='select a device path to flash')
|
||||
parser.add_argument('-l' , '--list', action='store_true',
|
||||
help='list connected devices')
|
||||
parser.add_argument('-c' , '--convert', action='store_true',
|
||||
help='do not flash, just convert')
|
||||
parser.add_argument('-D' , '--deploy', action='store_true',
|
||||
help='just flash, do not convert')
|
||||
parser.add_argument('-f' , '--family', dest='family', type=str,
|
||||
default="0x0",
|
||||
help='specify familyID - number or name (default: 0x0)')
|
||||
parser.add_argument('-C' , '--carray', action='store_true',
|
||||
help='convert binary file to a C array, not UF2')
|
||||
args = parser.parse_args()
|
||||
appstartaddr = int(args.base, 0)
|
||||
|
||||
if args.family.upper() in families:
|
||||
familyid = families[args.family.upper()]
|
||||
else:
|
||||
try:
|
||||
familyid = int(args.family, 0)
|
||||
except ValueError:
|
||||
error("Family ID needs to be a number or one of: " + ", ".join(families.keys()))
|
||||
|
||||
if args.list:
|
||||
list_drives()
|
||||
else:
|
||||
if not args.input:
|
||||
error("Need input file")
|
||||
with open(args.input, mode='rb') as f:
|
||||
inpbuf = f.read()
|
||||
from_uf2 = is_uf2(inpbuf)
|
||||
ext = "uf2"
|
||||
if args.deploy:
|
||||
outbuf = inpbuf
|
||||
elif from_uf2:
|
||||
outbuf = convert_from_uf2(inpbuf)
|
||||
ext = "bin"
|
||||
elif is_hex(inpbuf):
|
||||
outbuf = convert_from_hex_to_uf2(inpbuf.decode("utf-8"))
|
||||
elif args.carray:
|
||||
outbuf = convert_to_carray(inpbuf)
|
||||
ext = "h"
|
||||
else:
|
||||
outbuf = convert_to_uf2(inpbuf)
|
||||
print("Converting to %s, output size: %d, start address: 0x%x" %
|
||||
(ext, len(outbuf), appstartaddr))
|
||||
if args.convert or ext != "uf2":
|
||||
drives = []
|
||||
if args.output == None:
|
||||
args.output = "flash." + ext
|
||||
else:
|
||||
drives = get_drives()
|
||||
|
||||
if args.output:
|
||||
write_file(args.output, outbuf)
|
||||
else:
|
||||
if len(drives) == 0:
|
||||
error("No drive to deploy.")
|
||||
for d in drives:
|
||||
print("Flashing %s (%s)" % (d, board_id(d)))
|
||||
write_file(d + "/NEW.UF2", outbuf)
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
Reference in New Issue
Block a user