Got ps2avrGB to work with the V-USB protocol

2017-01-21 12:30:06 -05:00
parent 10ff962321
commit f7462aaa61
19 changed files with 886 additions and 17 deletions
@@ -0,0 +1,38 @@
+# MCU name
+MCU = atmega32a
+
+PROTOCOL = VUSB
+
+# disable UART since atmega32a apparently doesn't have it
+NO_UART = yes
+# this simplifies things for now
+NO_SUSPEND_POWER_DOWN = yes
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 12000000
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes   # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#BACKLIGHT_ENABLE = yes
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS = -DDEBUG_LEVEL=0
+OPS_DEFS += -DPROTOCOL_VUSB
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+CUSTOM_MATRIX = yes
+SRC = matrix.c
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex